• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

Rooster Tail

CheckmatePhill

New member
Hey guys, I've got a '73 MX-15 with a '72 80 horse merc. I trim the motor right before cavitation, and no rooster tail. I was just wondering what you guys might suggest on throwing a rooster tail, or if it is even possible with my set up? The engine height and shaft length is all good, but I do have a stock prop, if that matters.

Thanks
 
stock prop ?! my alm 4 blade flattens out a bit @ different times ,but its not gone by any means
 
Im not sure about that one. Ive always been able to throw a decent rooster with a stock alum prop. My old Glastron carlson w/ a 70 rude would make a nice rooster tail any day. it sounds like its not getting trimmed enough for whatever reason. At speeds below 45-50, my rallysport w a 23p aluminum wont trim high enough to throw a good rooster so I have to go a little faster to do it, but A chopper prop is great for rooster tails. My sportfire w/ a 28 chopper would throw a rooster tail at 20mph or 60mph so Im not sure what to tell you.
 
No, it's all a matter of engine height. If the motor is too deep in the water it won't throw a roostertail even at full trim. Nevertheless, try trimming fully at half throttle and then hammering it. Most boats will give you a little something. A prop with good grip (cupped) helps alot.
st96.jpg
 
Well thanks guys, I hope to get the chance to play around with it this weekend! Just out of curiosity, will a modern performance prop fit on the older style motor? I have been looking just to get a price idea, and I can't even find anything for the model/boat size.
 
only run 1/2 throttle and trim it to the sky. at the point you think it is too much........ keep going. you want it to cavitate. if you run out of trim. use the trailr button. :surf:
 
Back
Top