23 enforcer outboard

[eddyt]

hi guys i have a 88 23 enforcer with a 300 merc setback 18 inches. 25 trophy prop. propshaft is set at 1/2 inch above the pad. ive seen 70 mph. it porpoises a little bit. ive read somewhere on these forums someone had a enforcer outboard and was able to get rid of porpoising by having there prop cupped so the boat hung out better. i wanted to know what prop that was? and who did the work on the prop. thanks Ed

 

[corey331]

hi guys i have a 88 23 enforcer with a 300 merc setback 18 inches. 25 trophy prop. propshaft is set at 1/2 inch above the pad. ive seen 70 mph. it porpoises a little bit. ive read somewhere on these forums someone had a enforcer outboard and was able to get rid of porpoising by having there prop cupped so the boat hung out better. i wanted to know what prop that was? and who did the work on the prop. thanks Ed

I can't speak for your enforcer specifically , but if you are looking to have some prop work done, try calling Mark Croxton at Mark's Prop Shop. If you tell him what you have, what it's doing and what you want, he should be able to help you out. If I remember right, he was the head guy at Merc Racing's prop shop for a long time before he broke off on his own. I have quite a few friends that have had very good luck with him He is WAY cheaper than someplace like BBLades and has a much faster turn around too. Be worth a call.

http://www.marksprops.com/

 

[eddyt]

hey corey, i will contact mark thanks Ed

 

[eddyt]

23 enfocer outboard

hi guys, anybody have any success with mercury bravo xs on ther outboard checkmates ? thanks Ed