15' Check with merc 260 15" madefi

[six four]

98 260 with 15 inch mad efi offshore mid, cut down trim cylinder, 200 case with bobs welded on lwpu The motor has NEVER been re-nic, sleaved, or welded. Ruck took a peek at the block a little over a 2 years ago when its was apart for new top pinned pistons. Brand new top pin piston installed with new hardware. The motor currently has a Big Bore horn with 1" diamond marine spacer. Has diamond marine exhaust tuner as well. Allian cowl with 225 stickers. The computer is a offshore drag digital with 11,500 limiter, I never had it over 8500and donr that just this past weekend. When I bought it is was just a few hrs over break-in, and I have only ran it about 10hrs at the max. Its still on my 1975 15' checkmate which was built for drag racing, its loaded up with seastar pro steering trim indacator two sets center steer. I will sale the complete rig if anyone is interested. Im gonna ask $9500.00 for motor. Im in a pinch and need money or I wouldnt sale.... Its a nice rig/package. The boat has new Seastar pro Steering trim indactor blinker trim, hydraulic jack plate, hot foot, rex shifter, etc.





http://i42.tinypic.com/2gtvw49.jpg
http://www.youtube.com/watch?v=DVjp2wBMumU
http://www.youtube.com/watch?v=mG_bzfSNduo
shandon
870-347-6086

 

[six four]

Do a search and there is a thread where I done the build on it, complete rebuild on the boat, new transom, for stringers andded knees and thicker transom.
shandon
870-347-6086

 

[six four]

jps 94 with 27 yamaha drag, two people

 

[six four]

ttt need to move, make offers

 

[six four]

The boat alone can be purchased for $2500.00 call Shandon at 870-347-6086