• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

1991 maxxum 281

S

seagrave222

New member
This has twin 350efis 320hp ever since it was new it hard to start cold and hot to get it started cold you have to keep turn ing the key off and on to prime it and when it hot you just keep cranking on it till it starts both engines act the same. has anyone heard of this problem with these?
 
Ok first if it's done it since new why wasn't it fixed under warranty?
But both of those problems could be leaky injectors if they are leaking badly they are flooding it when it's hot and cold is because there's no fuel in the rails after it all leaks out but could be issues with bypass valve, regulator ect
 
Kind of odd that both engine have the same issue. If there is only one fuel tank I would check the pickup screens in tank if there are.
 
You must log in or register to reply here.
Back
Top