Glenn Kornett
Active member
Thanks for pointing that out, you are absolutely correct, and even my 2020 Pulsare 2400 long deck has a full liner at least up to the cabin entrance. I was going to give Dean some penetrating epoxy that I wanted him to use on the bolt holes for the jack plate when mine was being built, before they applied the 4200 or 5200 sealant, and Dean said that they use mixed resin to coat the wood in the drilled holes and then use the sealant on all the holes and bolts. I have never ever seen 1 drop of water in my bilge. It has stayed as dry as a bone. First boat I owned that ever did that. Of course it is totally covered under the roof of a covered dock but at least water has never leaked nor run into the bilge.