Big Block L29 vortec heads Edlebrock intake and carb

[sates]

Big Block parts

L29 oval vortec heads 200 hrs $300
Edlebrock oval RPM intake like new. $100
1996 454 factory carb I think 750 cfm $60

All parts are in good working order, as I have repowered to 502.

 

[sates]

Big Block parts

L29 oval vortec heads 200 hrs $300
Edlebrock oval RPM intake like new. $100
1996 454 factory carb I think 750 cfm $60

All parts are in good working order, as I have repowered to 502.

 

[Tantan32]

Will the intake and carb work on my 1988 carbed 454??
Thanks

 

[sates]

The carb will work on your boat.
The intake will only work if you have oval ports on your heads.

When I added the these oval port vortec heads to my boat, I picked up about 11 miles per hour. If you want to add cheap horse-power the vortec heads are the way to go along with the intake and carb.

 

[boatn70]

sates,
you added the intake carb and heads and gained 11 mph? what were you running prior to that? did you do a cam change to. i have the 300/330 454 and would love to have seen those numbers!!!

tell me more!!

kevin

 

[sates]

I had the 300/330 Gen. V ICU. The boat did 52mph at 4200 rpm when I bought it as it was way to slow. I added vortec heads, Edlebrock rpm intake, and a Gen IV Ecu to elliminate the rev limit. I would hit the rev limit at 4200 rpm so I had to change to the gen IV ICU to elliminate the rev limit and was able to spin over 5000 rpm with 22 pitch prop with ease. I did not change the cam. I think I could have gone up in pitch on the prop though.

 

[grover251]

sates do you still have the heads and intake? let me know grover@thumpernet.com

 

[sates]

Yes

 

[trickitout240]

Sates:
Are the vortec heads still available?