• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

Derrick's Inticer

Derrick, what size and pitch is your Lazer II, how high is the center of your prop shaft above the pad and what kind of RPM's are you turning at WOT ?? If I'm going to use the same equiptment that you use it will be a big help knowing where to start out with the settings. Thanks !!
 
Wickedrister,I have a 23p and it turns around 5300 wot I would like to try a 22p just to see what it would do . I think prop shaft is about 3 inches below the pad but i will check next time i get out in the garage also my jack plate is only a 4" offset. I did away with the oil injection I feel better about mixing it myself I got a block off kit from RickRacer for around 20.00 I think you will really like the seastar steering and the 135hp.
 
Derrick, I'm excited about next summer. I hate to copy your boat but I really like the way you set it up. Ok the pitch is 23 but is it a 13"- 13.25"- 13.50"-14". Thanks for the help
thumb.gif
 
Will do, I'm off to N.C.sunday morning to pick up the 135.Hope the compression is good and even. Thanks for the onfo Derrick !
 
thumb.gif
Picking up the v6 was a 7 hr round trip but we got the 135 home in goog shape. It has even compression on all 6 cylinders at 135 lbs. Ready to start installing my new parts !!
lol.gif
lol.gif
lol.gif
lol.gif
 
Back
Top