How do I install water pressure guage

[Eluder]

Where do I tap in on my 200 Hp Merc-got the guage from Big Red>

 

[bsprout]

here ya go bud

 

[ross]

what model? 2.4 2.5......ect?

 

[Eluder]

what model? 2.4 2.5......ect?

Good question. It is a NOS block 98? maybe. The plug you are showing is diffrent then what is currently on my engine. I thought that is where you piped in, now I need all the fittings.. Thanks for the great info/pictures

 

[Eluder]

Picture

Hay bsprout I noticed on your starboard head your t-stat hose goes down, are the connected to the tele-tale???

 

[bsprout]

well

The hoses coming off the thermostat housing arent connected to each other. I have 5 pee hoses out the back of my cowl. Its drystacked I dont run thermostats either. I have washers in their place....

 

[Enticer1]

Black V6's

Eluder, all the Black motors are the same. I believe its 3/8 NPT and you can get all of the fittings you need at Home Depot. I just rigged my Pro-Max this past sunday and it was just like the 200 that I just sold.

 

[Eluder]

Eluder, all the Black motors are the same. I believe its 3/8 NPT and you can get all of the fittings you need at Home Depot. I just rigged my Pro-Max this past sunday and it was just like the 200 that I just sold.

By the way I have some 1/4" tubing I snagged from my ATC/HVAC friend, I should be able to use this???

 

[Eluder]

Port tap for water guage

Hay bsprout, My Engine has a 7/8 fitting with a 1/2" hose going to the relief valve, can I tap into that hose for my guage??? Thanks...

 

[bsprout]

hey

sent u a pm

 

[Eluder]

needed "T" Fitting for this.

sent u a pm

It seems this hose is a water pump bypass. Neighbor installed guage on his engine and had the paper work and fitting I needed... Thanks for your help! Now I need to figure out whats wrong with my TACH.