• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

Inline 6 mid interchange

Kary

Active member
What mids interchange on the inline 6s?
Or, better yet, will an 85 hp 4 work on a inline 6?
I am hopin to snag an inline 85 4cyl with a short mid. I think the motor is 74-79 and wonderin if it will bolt to an inline 6.
 
Not sure, but my guess would be no.

Go to the Inline Newsgroup. I know I've seen similar conversation there and some of those guys are ex-racers and would know.

Server: news.kraits.org
Newsgroup: bigweek.mercury-inlines
 
kraits

too hard for me to figure out how to get the messages from there. It was different when I had outlook express tied in to my ISP. I sent a message on Screamnfly to someone that will know. Waitn to hear back
 
THE INLINE SIX WILL BOLT UP TO THAT 70'S INLINE 4 MID , YOU WOULD WANT TO BE SURE IT HAD THE CORRECT EXHAUST PLATE AND TUNER TO MATCH THE POWERHEAD. I AM PRETTY SURE THERE WERE DIFFERENT EXHAUST FOR THE 90 -115 --150 INLINES
 
THANX

I had an inkling it would work. Just needed some support on the fact. I thought I had heard that someone had done it before. I have the tuners and plates-just no mid. I am guessin that you meant the 85 hp will bolt up to the 74-up inlines. Thanx again
 
yes that is what i meant .any 66.6 c.i. inline 4 from 1972 up will interchange with the inline 6 .it was the same clamp bracket and driveshaft housing.even way into the late 80's they will still interchange.
 
Back
Top