-
Welcome to the Checkmate Community Forums forums.
» Interact with over 10,000 Checkmate Fanatics from around the world!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
» Post topics and messages
» Post and view photos
» Communicate privately with other members
» Access our extensive gallery of old Checkmate brochures located in our Media Gallery
» Browse the various pictures in our Checkmate photo gallery
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
"Wanted" MX-13 project hull - Gulf Coast NW Fla
- Thread starter CraigM
- Start date
CVX20SPRINT
Active member
Got an MX-15(with a factory pad) project boat that you can have if you want to do a 2000 mile round trip to pick it up.
CVX20SPRINT
Active member
I bumped the thread in the Checkmate listings with the info.Boat has rock rash back at the transom and when I got it flipped over I found about a 3' crack up one of the strakes.I assume that the core is cracked/rotten on that side as well as the floor flexes on that side and is rock solid on the other.Boat was run up until last year with a 115 Evinrude on it.I don't have the motor,but it could be had for probably $1000.It has T&T and a stainless prop.
Boat will need a lot of work,but no where near as much as some I've seen redone on here.The windshield is decent and the rub rail is like new.Steering and seats(not great) are still in it.