NEED PROP: What do i need to know?

[winter]

I need a 19p prop of good quality and performance but am unsure as to how they are sized. If i go to ebay to find one, what do i need to know? Overall diameter i guess, how about splines? Anything else? FWIW, it's a 1992 Persuader 20', stock 350mag, thru-hull exhaust and currently running a 21p mirage at only 4400 rpm. Does the fact it's thru-hull exhaust make a dfference?? Thanks everyone!

 

[kingsbiship]

Thru hull exhaust will allow you to run props without the barrel (more blade to push water)
such as the Quicksilver chopper type. There are many performance props like this! Look on
Scream&Fly in the 'props for sale' section. Plus... I think it sounds much better, and will lessen the backpressure!

 

[daren34]

try a 19 pitch mirage by merc
look on ebay about 125 for a decent used

daren

 

[ezstriper]

that 4400 should be about right for a stock 350 mag ?

 

[daren34]

imo a sbc should turn 4600 to 4800 at wot

this will give you a much better hole shot also

daren