• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

No rooster tail

If its a Bravo, put the drive all the way. Then trim it back up, max trim to set the limit switch should be 22 inches. Thats measuring from center to center of the trim ram bolts.
 
Big Red said:
If its a Bravo, put the drive all the way. Then trim it back up, max trim to set the limit switch should be 22 inches. Thats measuring from center to center of the trim ram bolts.
Click to expand...

I'm guessing thats running trim length? I have 27" bolt to bolt in trailer postion. Just don't want to confuse guys.
 
dream4ta said:
From what i have read i do believe that WI's little motor is still floating around somewhere waiting for you to put it in its new home! But i have slept since i thought i read that! :D
Click to expand...
You are correct! If I don't sell the boat, I am dropping it in this winter. At that point, I would not want to sell it. My main issue is the engine hatch. I would love to find an eluder I/O hatch or build one from scratch so I didn't have to cut up the original.
This one is perfect, even in the proper flake ;)
5Nf5G45Kb3Gd3m23pbc7h923506eaaa4e14ef.jpg
 
yellowfiero88 said:
You are correct! If I don't sell the boat, I am dropping it in this winter. At that point, I would not want to sell it. My main issue is the engine hatch. I would love to find an eluder I/O hatch or build one from scratch so I didn't have to cut up the original.
This one is perfect, even in the proper flake ;)
5Nf5G45Kb3Gd3m23pbc7h923506eaaa4e14ef.jpg
Click to expand...

HaHa, that ones for sale, come on Brian you know you want it. For a small sum you could have 3 great boats. Put the 383 in the enchanter and swap the hatch back and forth between it and this one:poke:
 
I hate to derail this thread any more than it already is but could you not fit a low rise dual plane like a Performer under there Brian? What could it cost hp wise? 20 maybe 30? If the RPM's are going to be under 5500 I wonder if it will even hurt that much.
 
I've done big roosters with my Senator and notice it looks cool but, drop the drive down a bit and you can feel it bite and faster with no rooster. Heah Brian, do you still have that stroker ? I broke my motor.
 
Big Red said:
If its a Bravo, put the drive all the way. Then trim it back up, max trim to set the limit switch should be 22 inches. Thats measuring from center to center of the trim ram bolts.
Click to expand...
okay stupid question time... how do u set the switch
 
You must log in or register to reply here.
Back
Top