paulsboats
Well-known member
Where do i find the hose for the wires and cables to go in,the ends for the engine and boat? do they make the ends or an old johnson?
-
Welcome to the Checkmate Community Forums forums.
» Interact with over 10,000 Checkmate Fanatics from around the world!
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
By joining our free community you will be able to:
» Post topics and messages
» Post and view photos
» Communicate privately with other members
» Access our extensive gallery of old Checkmate brochures located in our Media Gallery
» Browse the various pictures in our Checkmate photo gallery
Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.
rigging hoses
- Thread starter paulsboats
- Start date
teamhart2
Well-known member
you can get those kits, which seem like kind of a ripoff, some corrugated pipe and plastic fittings for a bunch of money like this:
I'd think at the least youd want the fancy billet bezels like these guys:
http://www.danamarineproducts.com/P...=4e88056-b7d5568d-91aa-45d2-ae29-d6450aa8b7a3
or for the do it yourselfer, some shop vac hose and pipe fittings and the dress fittings for engine compartment hoses can look cool, for a lot less, like yellowfiero88 did here:
I didnt want quite that fancy and was on a tight budget so went in between with the shop vac hose and some of the hose ends i found at an autoparts store, not a great pic, but can see it here:
I'd think at the least youd want the fancy billet bezels like these guys:
http://www.danamarineproducts.com/P...=4e88056-b7d5568d-91aa-45d2-ae29-d6450aa8b7a3
or for the do it yourselfer, some shop vac hose and pipe fittings and the dress fittings for engine compartment hoses can look cool, for a lot less, like yellowfiero88 did here:
I didnt want quite that fancy and was on a tight budget so went in between with the shop vac hose and some of the hose ends i found at an autoparts store, not a great pic, but can see it here:
Here's a few more places for the rigging hoses.
http://www.ebay.com/bhp/rigging-hose
https://www.thmarine.com/products/Rigging-Accessories/Motorwell-to-Engine-Rigging
http://www.ebay.com/bhp/rigging-hose
https://www.thmarine.com/products/Rigging-Accessories/Motorwell-to-Engine-Rigging
wired
Well-known member
Ive got this one . Its a very clean install witht he tube threaded into the adapter which is flush with the splashwell. You would probably need to make an adapter for an OMC though but its just a tube.
http://www.ebay.com/itm/4-FEET-OF-2...LUS-FLANGE-RF1DP-OUTBOARD-BLACK-/151230822306
http://www.ebay.com/itm/4-FEET-OF-2...LUS-FLANGE-RF1DP-OUTBOARD-BLACK-/151230822306
illMATTic
Well-known member
TH marine has black or chrome bezels as well as the hose. I picked mine up from www.jmsonline.com Prices are real good and service is better.
wired
Well-known member
I didnt want quite that fancy and was on a tight budget so went in between with the shop vac hose and some of the hose ends i found at an autoparts store, not a great pic, but can see it here:
Looks like a pretty darn good picture to me![/QUOTE]
Brings back a LOT of memories. My boat had that interior for a damned long time and we had a lot of fun when it looked like that,