Swivl Eze Ski Pylon

[xsv spd]

Looking at a Pulsare 2100BR that has no ski pylon. Does anyone know exaclty what ski pylon checkmate installs at the factory?

 

[BADBK]

you could always just use the transom eyes... not quite as optimal, but definitely still works.

 

[1979checkmate]

i finally got my ski pylon installed...and it makes WORLDS of difference from the transom eyes. so much easier to get up and it pulls from the right level... now i have mine set about 18" above the TOP.. yes its high.. but its just about perfect for skiing and wakeboarding.

 

[xsv spd]

I will pretend I am still the 24 year old fearless slalom maniac I used to be. Back then, my best pass was 28 feet off the line at 36 mph in the slalom course. Will I ever get there again...not likely but the ski pylon is a must for me. I was happy with the one Checkmate put on my Pulsare. I should have paid better attention to height dimensions etc...

If anyone knows the exact one Checkmate would install as a factory option I really could use the help. Might close the deal this week on the new Pulsare but this is one of the soft details that need to be worked into the overall cost.

Thanks for your help guys!

 

[groundloop]

If nobody here knows the exact information you're looking for I'd talk to Mike at the factory (419-562-3881).

edit to add:

The ski pylon on my Eluder looks like this model:

http://www.premiumpowersports.com/Swivl-Eze-Adjustable-Height-Deck-Master-Pontoon-Pylon-p-142.html

 

[JW]

This is the page here:

http://www.attwoodmarine.com/store/product/Fixed-Height

I found my Installation Instructions, the one I had is: Model # 922-ADJ

Must be the 922-ADJ-S that's on the site now.

 

[Brad Henderson]

HEY XSV SPD.... YOU CAN TRY TO REKINDLE YOUR OLD PASSES, THING IS NOW YOU WOULD NEED TO TAKE A WEEK OFF WORK CAUSE YOUR ARMS AND SHOULDERS FEEL LIKE TWO FULL 5 GALLON JERRY CANS !!!!!

trust me, I FOUND OUT THE HARD WAY

 

[Mbailey]

pictures

I put one on last year have a 2100BR. Send me an E-mail MOB1110@aol.com and I can send pictures. Tried posting it on here but having problems. I believe the factory uses a standard manufacturer. You just pay more. Mine came out great.

 

[Mbailey]

Sorry, Forgot, Mine is the Prodeck master adjustable. I think about $230 all stainless, large Aluminum base plate

 

[pulse92]

JW, I have a '92 Pulse that I want to be a better ski and tow boat. I have a 150 XR6 on the back now, and noticed you have a Laser prop on yours. I was looking at getting a Tempest Plus 23, or a High Five prop for this summer to help cavitation and hole shot.

Any ideas?

 

[karzrus]

I bought one of these,

www.insanitypylons.com.

I really like it, My Eluder has a ski tow eye at the back that is pretty good but kind of low and it drops when the bow lifts on take off. I still use it for tubing.

This pole gives you three pull heights 4',6' and 7', it installs in about 5 mins. It is totally removable and leaves nothing behind (no base plate or anything) and it can be moved from boat to boat. I've had it for two years now and for skiing and wakeboarding it great cause the pull point is so far forward.