TabbmanII

[seeing clearly]

I asked about the tab indicators last week.Its an 89Vision, the tabs look to be made by:Boat leveler company. I think they came on the boat new,but don't know for sure cause I bought it used.Theres a pic of it under Angies Vision that shows them pretty good.Let me know if you need more info. THANKS

 

[Tabman II]

seeing clearly,

If you have a Boat Leveler system, which is most likely true since they are standard on Checkmate's from the factory, then our Boat Leveler Trimdicator Conversion kit is the answer (IPL1010A, $378, http://www.bennetttrimtabs.com/trimd.htm)! This kit provides you will everything you will need to add our Trimdicators to your Boat Leveler trim tab system, since it includes two new Bennett Marine actuators with the Sensor Coils already installed. See our Sensor Coils are built into the Upper Hinge of our actuators, so this kit will replace your current Boat Leveler actuators with ours and move the hydraulic lines inside your bilge area and get them out of the weather (win-win situation)! Please take a look at the standard installation instructions link above and let me know if you have anymore questions.

I look forward to your reply!

Sincerely,
MJ Thomas
Bennett Marine, Inc.
Client Services
www.bennetttrimtabs.com
trimtabs@earthlink.net