illMATTic
Well-known member
well i have just started on the fun. got tired of sitting on the couch so i went out to the garage and started removing anything that stood in my way. since i havnt found a motor yet, i guess i should start on the looks. i plan to refinish the exterior of the hull aswell as the inside. last year i did some polishing on the hull to give it some shine. i also redid the interior. now its time for the floor and finish what i started on the hull. feel free to give your thoughts and concerns at any time.
this is the hull before i did the first sanding last year.
this is after the sanding in its present state. i did some probing and i think i can sand out all the yellow gell to get back to the black.
here is what i have to deal with inside. the back 2-3 feet of the floor are gone. trim mount and batt. mount are gone as well. the transom however, is very strong. no flex at all. i also found that my trim lines had come loose and leaked into the back.
i have a buddy who works at a boating store a mile from my house so i can get all the materials at a price.
matt
this is the hull before i did the first sanding last year.
this is after the sanding in its present state. i did some probing and i think i can sand out all the yellow gell to get back to the black.
here is what i have to deal with inside. the back 2-3 feet of the floor are gone. trim mount and batt. mount are gone as well. the transom however, is very strong. no flex at all. i also found that my trim lines had come loose and leaked into the back.
i have a buddy who works at a boating store a mile from my house so i can get all the materials at a price.
matt