" For Sale" 2008 long deck

[Check This]

The boat was bought new in 2008
Powered by 300x 12 hrs on rebuild
New Lower unit
26 trophy 4 blade prop
smartcraft guages
gps
tach with hr meter
water temp
water pressure
volt
upgraded sound system
full sunbrella cover
five pop up cleats
Hydraulic jack plate
custom setback bracket
Matching sea hawk trailer with mag wheels
four cutom cup holders added
Side navigation lights
85 to 90 all day long
I am going to a 24 guys, will buy and rig at 24/7 marina in lake w over the winter.
If I dont sell I will add the hot foot -- pop up trim guage and new interior over the the same time. Then I will keep it.
price is 40k -- all guages rewired. all battery cables rewired and marked. I am as anal as it comes with a boat guys. It has coats of zymol on it

 

[fireguy]

That sure is a purdy boat. Good luck with the sale.

 

[Bruce]

A little off topic but ... how is that cover working out ... looks to fit quite nicely. I'm looking for something similar which will keep the summer weather out ... the odd rain shower etc etc. Maybe you could tell me what name brand etc.........

Boat looks terrific as well ....

Thanks

Bruce

 

[Check This]

A little off topic but ... how is that cover working out ... looks to fit quite nicely. I'm looking for something similar which will keep the summer weather out ... the odd rain shower etc etc. Maybe you could tell me what name brand etc.........

Boat looks terrific as well ....

Thanks

Bruce

The cover is sunbrella material it works great. I was originally going to add snaps but I never leave her in the water anyway.I have a girl in N/E Pa who can do the same job -- she is good, she measureas and all to custimize each boat.

 

[jln]

very nice boat , best of luck on the sale.

 

[Roberts Marine]

I have had the same problem posting higher priced boats also so I know how you feel. If your not giving it away you get ripped on. Did you have a clip on you tube of this boat with the engine running? I had a customer send me a link to it asking how much. I told him new it was mid 40s easy depending on what he wanted. If you e-mail me I will give you his address since I haven't heard back from him.
Bob
rmarine@pressenter.com

 

[Check This]

I have had the same problem posting higher priced boats also so I know how you feel. If your not giving it away you get ripped on. Did you have a clip on you tube of this boat with the engine running? I had a customer send me a link to it asking how much. I told him new it was mid 40s easy depending on what he wanted. If you e-mail me I will give you his address since I haven't heard back from him.
Bob
rmarine@pressenter.com

Thanks guy
People who rip do not bother me -- it is an open site pople can say what they want - You know what you have as I do and because you are a dealer this puts you more into the know of the actual cost of building these boats. I was going to shoot video this weekend but our weather in the Northeast has been horrible to say the least. I will give it a shot next weekend for sure.
My e mail address is anteorme@yahoo.com my phon # is 646 773 7563

 

[Check This]

I WOULD LIKE TO THANK ALL FOR YOUR KIND WORDS. More then myself C/M deserves the Kudo's for bringing a great product to market now if we can get them to do the finising touches on the wiring -- guages we will really have something here. These Long decks are eye candy to say the least -- I love the boat!!! I will buy another hands down, God willing.

 

[hotdaddy27]

I WOULD LIKE TO THANK ALL FOR YOUR KIND WORDS. More then myself C/M deserves the Kudo's for bringing a great product to market now if we can get them to do the finising touches on the wiring -- guages we will really have something here. These Long decks are eye candy to say the least -- I love the boat!!! I will buy another hands down, God willing.

Hey Check This,

Just some added info, I ordered my boat with the "Eddie Marine Elite" gauges and thus far I have had good luck....and their customer service is second to none! That means a lot these days. They don't look as good as the Livorsi (is that what you have?) but the wiring is simple and it comes with connectors from Eddie Marine (special ones), so Checkmate can't use any junk.

Good luck.

HD

 

[Check This]

Hey Check This,

Just some added info, I ordered my boat with the "Eddie Marine Elite" gauges and thus far I have had good luck....and their customer service is second to none! That means a lot these days. They don't look as good as the Livorsi (is that what you have?) but the wiring is simple and it comes with connectors from Eddie Marine (special ones), so Checkmate can't use any junk.

Good luck.

HD

Check that
H/D I order everthing from Eddie's Marine I put smartcraft guages in. My friend Chris put Livorsi in his Skater they are a great company also that stand by what they sell. I hope checkmate upgrades under the dash. I will tell you it is the easiest boat to work on.

 

[WILDMAN]

This boat was a brand new leftover when Anthony got it a couple months ago. There was never a mark on it. Some of us that "beach" our boats, only do it on sand and walk them in and "LIFT" the nose onto the sand. I never drive it up on the beach. As long as there's no waves, it won't make a mark. Here's the video of me driving it at 90.

http://www.youtube.com/watch?v=R2xaKKfZWMc

 

[Craig]

I am also very particular with my boats and in my opinion it is not a big deal to pull your boat up on sand. I tie to a screw-in anchor and keep the boat out far enough so it doesn’t have too much weight on the sand. If you do it all summer, which I do, all you need to do is buff/polish the keel or portion of boat that gets a little dull at the end of the season if you want that new shiny look back. Takes about a half hour and it will be as good as new. I usually just run 800 grit sandpaper from the bottom of the keel to the back of the boat, about 10”-12” each side of center. A lot of the outboard guys, which I use to be one, do this anyway as they feel it is a little faster. Checkmate has a thick layer of gel and you can do it for years and still not wear through the gel.

-Craig

 

[Check This]

I am also very particular with my boats and in my opinion it is not a big deal to pull your boat up on sand. I tie to a screw-in anchor and keep the boat out far enough so it doesn’t have too much weight on the sand. If you do it all summer, which I do, all you need to do is buff/polish the keel or portion of boat that gets a little dull at the end of the season if you want that new shiny look back. Takes about a half hour and it will be as good as new. I usually just run 800 grit sandpaper from the bottom of the keel to the back of the boat, about 10”-12” each side of center. A lot of the outboard guys, which I use to be one, do this anyway as they feel it is a little faster. Checkmate has a thick layer of gel and you can do it for years and still not wear through the gel.

-Craig

Thanks Caig -- I did it this week end buffed right out, then I did the zymol thing better then new!!!

By the way all guages working now!!!

 

[BADBK]

Nice rig... what kind of steering wheel do you have? I need a nice new fancy purrdy one!

Oh, and your cleats w/bezels.. what flavor?

Thanks, good luck w/sale.

 

[Check This]

Nice rig... what kind of steering wheel do you have? I need a nice new fancy purrdy one!

Oh, and your cleats w/bezels.. what flavor?

Thanks, good luck w/sale.

Flavor is blue -- Eddie's marine

Sea -star steering I believe Tough when you jack that plate up but that the price ya pay for no chine and a fast boat.

 

[BADBK]

^ Cool, Eddie's Marine cleats? I have seastar hyd steering also, but your wheel has to be something else, it's much nicer than mine!

 

[Check This]

^ Cool, Eddie's Marine cleats? I have seastar hyd steering also, but your wheel has to be something else, it's much nicer than mine!

Isotta I made Randy take it out of his 24