• Welcome to the Checkmate Community Forums forums.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access to our other FREE features.
    By joining our free community you will be able to:

    » Interact with over 10,000 Checkmate Fanatics from around the world!
    » Post topics and messages
    » Post and view photos
    » Communicate privately with other members
    » Access our extensive gallery of old Checkmate brochures located in our Media Gallery
    » Browse the various pictures in our Checkmate photo gallery

    Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact support by clicking here or by using the"contact us" link at the bottom of the page.

1994/2008 Custom Checkmate Pulsare 2100

B

boatwreck77

New member
I hate to do it but, gotta sell my baby!! The boat is a 1994 2100 Pulsare, it has been completely rebuilt transom, stringers, floor, and bulk heads in 2006 and in 2008 the rest of the boat was customized from the paint to the new interior, gauges, ect..... Changes and upgrades are
Gauges all autometer platinum monster gauges Tach, GPS speedo, 2-EGT's, Low pressure fuel, High pressure fuel, Fuel level, water pressure, water temp. and volt.

Also, a mech. trim and jackplate indicator.
Custom made switch panel with enviormentally sealed switches
Latham shifter
key switch delete all done with toggles
2- storage compartments in front and rear console
Clarion Stereo with 2 speakers in hand made kick panels
Custom high back bucket seats
3-Grab handles
Steering Sea star pro helm and hoses
Uflex HD ram
All hoses are bulkhead fittings
All exterior fasteners including rub rail are hex head
Optima battery
New style HD Mercury trim pump


Trailer is a 2003 Loadmaster also customized
15" rims and tires with matching spare including hub
All walk around walk boards
All LED lighting

Motor 1998 300 Pro Max Sportmaster 1.62 Approx. 100 hours
Including a spare fresh rebuilt long block

The boat was a labor of love with countless hours of work. I just want to see someone else enjoy it since we now have a 2 year old son and don't get to use it as much as it should be used. $25,000.00 OBO open to possible trades. Any questions please ask or call 941-587-9626 Thanks Jeff and Heather Connelly and Tyler too! new price $22,000

Sorry not sure how to post pics on here
​
 
357j1hl.jpg
[/IMG]found out how i think
 
Can you access the rear bilge area? What are the forward and aft center consoles made out of? Who rebuilt the mota and extra long block? What material was used for the new floor stringers, etc?

Big pics are good. Looks bada$$!
 
the consoles are made from a mold i have and are all glass the power head thats on the boat is a factory motor 991/2 prob 100 hrs tops. the spare longblock was pulled with approx 50 hrs with a slight bearing noise. brendan powers went through it checked all no issues. so i had my mech hone and replace all bearings rings and gaskets anyway. you can access the rear by hinging the console and or both buckets forward. or if any work is needed the rear wall is removed by 4 bolts. i used wood to do the stringers, bulkheads, floor and transom deck off. have full detailed picks of the full resto for the buyer. any other questions fire away
 
dang i grew up on keuka lake not far from you. thats where this boat started life. the boat runs high 80's to 90 everyday the best has been 94 thanks jeff
 
Small world my home town is Penn Yan and my parents still lives on Keuka about a mile from the channel my boat seats there all summer were did you live branchport, Hamonsport our down by me in PY.
 
You must log in or register to reply here.
Back
Top